Vicon VN-901T Especificações descarregar pdf (Página 4)

Quick Installation Guide

2. Installation

• Mounting

The VN-901T Encoder is supplied with a mounting kit for wall mounting. The mounting bracket

can be positioned for mounting the encoder on a vertical surface.

• Connecting to the RJ-45

Connect a standard RJ-45 cable to the network port of the network encoder. Generally a

cross-over cable is used for direct connection to a PC, while a direct cable is used for connection

to a hub.

• Connecting the Power

Connect the 12 VDC or 24 VAC power adapter to the encoder.

• Network Connection and IP Assignment

The video encoder is designed for use on an Ethernet network and requires an IP address for access.

Most networks today have a DHCP server that automatically assigns IP addresses to connected

devices. By the factory default, your video encoder is set to obtain the IP address automatically via

DHCP server. If your network does not have a DHCP server the network camera will use

192.168.1.100 as the default IP address.

If DHCP is enabled and the product cannot be accessed, run the “Smart Manager” utility on the CD to

search and allocate an IP address to your products, or reset the product to the factory default settings

and then perform the installation again.

1. Connect the Video Encoder to the network and power up.

2. Start SmartManager utility (Start>All programs>SmartManager>SmartManager); the main

window will be displayed. After a short time any network devices connected to the network

will be displayed in the list.

Select the encoder on the list and click right button of the mouse. The pop-up menu displays

as below.

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Vicon VN-901T Especificações Página 4