Vicon Roughneck V920D Series Guia de Instalação descarregar pdf (Página 67)

• NAT Settings

- Enable – Check this box to enable NAT traversal. When enabled, the network camera

attempts to configure port mapping in a NAT router on your network, using UPnP. Note that

UPnP must be enabled in the network camera (see System>Network>UPnP).

* Automatic setting: When selected, the network camera automatically searches for NAT

routers on your network.

* Manual setting: Select this option to manually select a NAT router and enter the external

port number for the router in the field provided.

Notes:

- If you attempt to manually enter a port that is already in use, an alert message will be displayed.

- When the port is selected automatically it is displayed in this field. To change this enter a new

port number and click Save.

When the settings are complete, click Save, or click Reset to revert to previously saved settings.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 81 82

Sem comentários

Vicon Roughneck V920D Series Guia de Instalação Página 67